Multi-Position Electromantle Integral Control- 3x500ML 230V

MULTI-POSITION ELECTROMANTLE INTEGRAL CONTROL- 3X500ML 230V

  • Brand: Electrothermal
  • SKU: 166-2105
  • County of Origin: UNITED KINGDOM
  • Product Code: EME30500/CEB
  • Availability: In Stock
  • Speak to our Expert 1800 103 6641

Multi-Position Electromantle Integral Control- 3x500ML ELECTROMANTLE 230V UK AND EU PLUGS

Features

1. The 3 place multi position (extraction) mantle has a built-in electronic controller and offers a choice of heater only (EME3) or heater/stirrer (EMEA3) combination.

2. For both Heater EME3 and Heater/Stirrer EMEA3 models

     i. Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching
    ii. Three 12.7 mm diameter support rods are included
    iii. Round bottom flask capacity 
    iv. Top cover is polypropylene and external surfaces are powder coated giving good general chemical resistance
    v.  Coiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transfer and support
    vi  Earth (ground) screen encloses the heater for added safety
    v.  Individual heater cartridges are replaceable
   vi.   Neon lights indicate when power is on and supplied to heaters and, if applicable, supplied to stirrers

3. Additional Features for Heater/Stirrer EMEA3 models only

    i. Allow the solution to be stirred and heated simultaneously
   ii. Provide stirring speeds of between 50 to 1000rpm 
   iii.One stirring control operates each set of three recesses

Technical Specification

Flask Capacity3 x 500 ml
Dimension (D x W x H) mm285 x 755 x 130 mm
No. of Recesses
3
Material Polypropylene top on powder-coated aluminium
Max element temperature
450°C
Shipping weight7.4 Kg



Write a review

Note: HTML is not translated!
    Bad           Good