Lovibond Photometers used for measurement purposes in science laboratories
Photometers
are important lab equipment used in science experiments to measure the
intensity of light from a particular source. The principle of measurement
followed by these devices is to compare the illumination produced by an unknown
source to that of a standard source and calculate the intensity of light
accordingly. Various photometers use different principles to operate. Selection
of a source should depend on the accuracy you desire and the type of source
that is commonly being studied. Spectrophotometers and filter photometers are
the two most common types of photometers being used for measurement purposes in
science laboratories. These have prisms or optical filters within the
DEN-1, McFarland densitometer
Biosan DEN-1 densitometer (suspension turbidity detector) includes A-16 adapter for 16 mm tube..
DEN-1B, McFarland densitometer
Biosan DEN-1B, McFarland densitometer includes A-16 adapter for 16 mm tubes, external powe..
Lovibond COD Complete System MD 100
Lovibond COD Complete System MD 100Features:This Spectrophotometer uses high quality interference fi..
MD 200 Chemical Oxygen Demand (COD) Vario Photometer
MD 200 Chemical Oxygen Demand (COD) Vario PhotometerFeatures:Waterproof (as defined in IP 68, 1 hour..
MD 600 MaxiDirect, Complete
MD 600 MaxiDirect, CompleteFeatures:The meter is Waterproof (as defined in IP 68, 1 hour at 0.1 mete..
DEN-600 Densitometer (Photometer)
DEN-600, Densitometer, portable battery/mains, cell photometer turbidity 0 - 16 McF & 0.3 Abs, w..
MD100 COD Vario Photometer
MD100 COD Vario PhotometerFeatures:Waterproof (as defined in IP 68, 1 hour at 0.1 meter)Automatic Sw..
Thermoreactor RD125
Thermoreactor RD125Features:The reactor is a 24 position heating block for reacting various test tub..
Showing 1 to 8 of 8 (1 Pages)